[Product Name] Disposable Virus Sampling Tube

[Registration Certificate No.] Ji Chang Xi Bei No. 20210332

[Product Technical Requirements No.] Ji Chang Xi Bei No. 20210332

[Production Enterprise Registration Certificate No.] Jichang Food and Drug Administration Production Preparation No. 20150010

[Model and Specification] Model: M1 type (inactivated type with swab), M2 type (inactivated type without swab)

F1 type (non inactivated type with swab), F2 type (non inactivated type without swab)

Specifications: 1mL/piece, 1.5mL/piece, 2mL/piece, 2.5mL/piece, 3mL/piece, 3.5mL/piece, 4mL/piece, 5mL/piece, 6mL/piece, 7mL/piece, 8mL/piece, 9mL/piece, 10mL/piece, 15mL/piece, 20mL/piece

[Structure and composition] Consists of swabs and/or tubes containing preservation solution. Non sterile provision. The inactivated preservation solution consists of guanidine salt, disodium hydrogen phosphate, potassium dihydrogen phosphate, 2-methyl-4-isothiazolin-3-one, and phenol red, with a color of red. The non inactivated preservation solution consists of disodium hydrogen phosphate, potassium dihydrogen phosphate, 2-methyl-4-isothiazolin-3-one, and phenol red, with a color of red.

[Product Scope of Application] Used for sample collection, transportation, and storage.

[Usage]

1. Before sampling, clean your hands, tear open the outer packaging of the sampling swab, and remove the swab. Be careful not to touch the swab head.

2. According to different sampling requirements, use a swab to sample at the corresponding location.

3. After sampling, quickly place the swab into the sampling tube containing the preservation solution to avoid contact with other parts.

4. Break the swab rod, discard the tail, and then tighten the tube cover to complete the sampling.

5. Mark the sample information on the label, properly place and store it (inactivated at room temperature, non inactivated at 4 ℃), and send it to the testing department for testing within one week.

[Notes, Warnings, and Reminders]

1. Before use, check if the packaging is intact and do not use products with damaged packaging.

2. It is strictly prohibited to put the sampling swab into the storage solution before use.

3. This product is only used for storage during the transportation process after sample collection and is limited to one-time use.

4. Do not use products that have exceeded their expiration date.

5. After using the product, waste should be disposed of in accordance with the regulations of the hospital or environmental protection department.

[Contraindications] None

[Storage, transportation conditions, methods]

This product should be stored indoors at room temperature, with a relative humidity of no more than 80%, without corrosive gases, and with good ventilation.

Transportation tools should be clean and dry, and products should be loaded and unloaded lightly during transportation to avoid damage caused by squeezing. When stacking, follow the arrow markings on the box and do not invert it. Avoid exposure to sunlight and rain, and avoid severe vibration and impact.